Cleaning and maintenance methods of basswood-pros and cons of basswood board

Cleaning and Maintenance Method of Basswood - Advantages and Disadvantages of Basswood Boards

Basswood is a high-quality wood with grease, wear-resistant, corrosion-resistant, not easy to crack, fine wood grain, easy to process, and strong toughness. It is widely used in the production of woodworking boards and wooden crafts. Basswood has moderate hardness, air-dry density of 500kg-550kg/m3, and has grease, wear-resistant and corrosion-resistant, and has uniform and dense intercellular structure, but its wood properties are mild, so it is not easy to crack and deform, and the wood grain is fine, easy to process, and has strong toughness. It has a wide range of applications and can be used to make decorative materials such as wooden lines, wooden boards, wooden crafts and other decorative materials.

The white woody part of basswood is usually quite large, milky white, gradually incorporates heartwood that is light to brown red, and sometimes has darker stripes. This wood has fine uniform texture and blurred straight lines. Basswood has good mechanical processing properties and is easy to process with hand tools, so it is a superior engraving material. The fixing performance of nails, screws and glue is good. Good smooth surface can be obtained by sanding, dyeing and polishing. The drying is still fast, and the degree of aging is low. The shrinkage rate is quite large during drying, but the dimensional stability is good. Furniture materials.

Barwood is yellow-white, slightly light and soft, with straight texture, slightly thin structure, silky luster, and soft. Wood sawing, spinning, drilling, tenoning, nailing, glueing, painting, and coloring have good performance. The trunk and neck are straight and straight, and the yield is high. The material is lighter in color, with large gaps, and is easy to dye or bleach. It has low dry shrinkage, does not deform or crack after drying, and has moderate hardness. It can be used for furniture materials in northern regions.

Basswood wood has high hardness and strong toughness, and is especially difficult to crack. However, basswood furniture also has many disadvantages. Basswood has poor corrosion resistance and poor steam bending ability, etc. Therefore, people cannot seek completeness, and wood cannot seek completeness.

Cleaning and maintenance methods of basswood

Surface protection and cleaning

Weaned wood furniture is durable, but its paint surface is very easy to fade. To do this, the furniture must be waxed frequently. You can first use a wet rag dipped in some neutral detergent to gently wipe the surface of the furniture. When wiping, follow the texture of the wood. After cleaning, wipe it with a dry rag or sponge dipped in professional wood wax. When waxing, the center should be used as the origin, first around and then in the middle. However, it is best not to wax too frequently, as 1-2 times a year is best.

Temperature control

Because of poor heat resistance, it is best not to get close to the heated place. Generally speaking, try to avoid sun exposure, because strong light will cause basswood furniture to fade; in addition, heating and lamps that can emit strong heat will also deform basswood furniture, so you should try to stay away; furthermore, do not put hotter water cups, teapots and other things on basswood furniture in normal times, otherwise it will burn basswood furniture.

Mount and Tenon structures cannot be forgotten

Mount and Tenon structures are very important for solid wood furniture. Once loose or fall off, solid wood furniture cannot continue to be used. Therefore, you should pay attention to check whether the parts are falling off, degummed, broken tenons, loose mortises, etc. at these junctions. If the screws and other parts fall off, you can clean the screw hole first, then fill it with a thin wooden strip in the hole, and finally reinstall the screw. Wuhan Decoration Quotation Network recommends that if the tenon head is broken, professional maintenance personnel need to be dealt with.

Indoor humidity

The indoor humidity of solid wood furniture must be slightly higher than its own moisture content, so consumers should understand the water content parameters of solid wood furniture when purchasing furniture, and refer to the use environment humidity marked on the instructions.